| manufacturer | General Motors |
| make | Buick |
| fcc id | AVL-B01TAC OHT01060512 |
| ic id | 5461A-01060512 5461A-B01TAC |
| oem part number | 1358815 1358812 |
| frequency | 315Mhz |
| number of buttons | 3 |
| reusable | Yes, After Unlocking |
| battery size | CR2032 |
| compatibility | 2013-2018 Buick Encore |
| keyway | High Security |
| chip id | Non Transponder |
| code series | Z1000-Z6000 |
| keyway ilco | HU100 |
| keyway jma | OP-11 |
2013-2018 GM BUICK ENCORE 3B FLIP KEY REMOTE FOB TRANSMITTER AVL-B01TAC
1. Get in the vehicle and close all the doors. 2. Using a working original key, insert the key into the ignition and switch to the ON position as far as it will go without starting the vehicle, WAIT 5 SEC/ OR THE PADLOCK LIGHT ON THE DASH GOES OUT. then switch OFF. 3. Remove the key from the ignition. 4. Insert the new key into the ignition and switch to the ON position as far as it will go without starting the vehicle. WAIT 5 SEC / / OR THE PADLOCK LIGHT ON THE DASH GOES OUT. 5. The key is now programmed. 6. Test the key to ensure that it starts the vehicle. If the key did not program, restart the programming procedure from STEP 1. To program additional keys, repeat the entire procedure.
| Weight | .125 lbs |
|---|---|
| Condition | Like New, OEM Refurbished |
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.
Based on 0 reviews
Be the first to review “2013-2018 GM BUICK ENCORE 3B FLIP KEY REMOTE FOB TRANSMITTER AVL-B01TAC”
You must be logged in to post a review.
There are no reviews yet.