, ,


SKU: 40070

In stock

$1,995.00 $2,495.00

In stock

The XTool AutoProPAD programming machine from XTool is an OBD2 vehicle key/remote programmer and an EEPROM reader/programmer (reflasher) (and soon a cloner). It is ideal for advanced automotive technicians and locksmiths providing security services for their customers for most vehicle makes worldwide. It is the perfect compliment to the SMART Pro/MVP Pro/TCode Pro for locksmiths that need additional coverage for models Advanced Diagnostics doesn’t support.

XTool AutoProPAD Main Features:

  • Transponder & Remote Programming: Including Acura, Audi, Fiat, Ford, GM, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lamborghini, Land Rover, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Porsche, Saab, Scion, Subaru, Toyota, and Volkswagen. See the AutoProPAD Application Guide more details
  • Basic & Advanced EEPROM & MCU Reflashing—Replaces the need for any other reflashing device
    • Programs Honda/Acura and Toyota/Lexus: Reflashes a wide selection of vehicles, including 01-03 Prius, 03+ Sequoia, and 1997 LS400.
    • Ready-to-Start Reflashing: Rather than virginizing the immobilizer, you can reflash most first generation Toyotas and Lexus with a Ready-to-Start file. After reflashing, no registration process is needed. The car will start immediately with a pre-cloned key. (This process is required for many “early 1998” Toyota/Lexus vehicles where a traditional reflash will not work)
    • Clone from the Immobilizer: Pulls a key value needed to write to a cloning key with a cloner that will start the car. No reflashing needed, your customer’s electronics are left unaltered. (Customer’s original key will still be operational)
    • Save/Backup your customer’s original BIN file before overwriting. Access all saved files anytime in the future when needed.
    • PIN Reading functionality for Chrysler, Isuzu, Nissan, and VW is built in. Save your BIN file from the chip and the XTool AutoProPAD car remote key programmer analyzes the file and displays out the correct value.
  • Unlimited Usage: No tokens to worry about. It will work forever.
  • Easy, FREE Updates for a Year: The XTool AutoProPAD car remote key programmer updates directly via the Internet using built-in Wi-Fi. Updates are being added regularly and frequently. When your first year is up, just purchase an inexpensive subscription for updates to keep getting the latest software for the newest vehicles.
  • Automotive Diagnostic Functions: reading & clearing fault codes. Also includes a plethora of othe diagnostic capabilities (fully functioning OBD2 diagnostic tool for auto shops).
  • Large Touchscreen Interface: Using the large 8″ capacitive touch screen, paging through the options is fast and easy.
  • Superior Support: Manufacturer is able to remotely control and diagnose your device using TeamViewer for any needed assistance or updates. Technical manuals, circuit diagrams, common trouble codes, etc. are available for viewing on the XTool AutoProPAD car remote key programmer, making external support less necessary. On-the-vehicle support is provided by Americans, located in Southern California (Pacific time zone). The ability to take screenshots and videos of your screen are built into the tablet.
  • Easy, Free Updates: Updating is simple and updates are frequent.


  • XTool AutoProPAD Current & New Stand-Out Features:
    • BMW CAS Key Programming
    • Chrysler / Jeep / Fiat New System PIN Reading & Programming
    • Chrysler CAN PIN Reading & Programming
    • Chrysler Type1 & Type2 PIN Read Via EEPROM
    • Ford 128-Bit Add-A-Key & All-Keys-Lost Programming
    • Ford Fusion 2013+ System Rolling Code Bypass (No NASTF Needed)
    • Ford 10-Minute Bypass on All-Keys-Lost for All Ford Systems: Skip right on through the normal 10-minute wait.
    • Ford Parameter Reset
    • Ford/Lincoln/Mercury Keyless Entry Keypad Code Read
    • GM PIN Code Reading
    • GM Remote Programming
    • Honda 2017 Proximity System Programming
    • Honda Transponder Programming: Super-quick!
    • Hyundai & Kia Old PIN Codes: Converts VIN to PIN for 2007 and older
    • Hyundai & Kia New PIN Code Read: No more buying PINs from the dealer (Smart Keys)
    • Nissan BCM to PIN Conversion: Supports the 5-digit and 20-digit BCMs
    • Subaru G-Key (80-Bit) Add-A-Key & All-Keys-Lost Programming
    • Toyota H-Chip Programming w/ No 16-Minute Wait (Internet connection required until end of February)
    • Toyota G-Chip Programming w/ No 16-Minute Wait
    • Toyota/Lexus Proximity System 6 & 7 Programming All-Keys-Lost & Add-A-Key (ie. 2017
    • Toyota CH-R & Prius Prime)
    • VW/Audi 2013-2016 Programming for Add-A-Key
    • VW Touareg 2005
manufacturer XTOOL
battery size 4000mAh, 7.4V Lithium-Polymer Battery
more info Operating System: Android
Processor: Quad-Core 1.60 GHz Processor
Memory: 1GB RAM, 8GB Flash
Display: 8.0" Touchscreen
Camera: 5.0MP Rear-Facing w/ Flashlight
Ports: USB Type-C, DC charging, DB15 COM
Dimensions: 9.45"Wx6.97"Hx1.18"D


>AutoProPAD Main Unit
>ALL cables and adapters necessary for programming and auto diagnostics, including OBD1 for older Nissan/Infiniti
>EEPROM Adapters
>KC100 Key Tag Tool (for precoding chips, and later for cloning)
>Breakout Box
>Charging Dock
>USB C-Type Data Cable
>USB 3.0 Data Cable
>AC Power Cable
>Hard Shell Carrying Case
>User Manual
>Certificate of Quality with Product Activation Info
>Packing List

There are 2 methods for updating your XTool AutoProPAD car remote key programmer:
1.Connect your AutoProPAD to a Wi-Fi network. Click the menu button on the top-left and select Updates. There you will see all updates available and can simply click each one to get your device updated.
2.Connect your AutoProPAD to a Wi-Fi network. From any screen showing all vehicle manufacturers, a small, white Update icon will appear next to a manufacturer name if an update is available. Click each update icon to perform the update one at a time.
Please check for updates frequently. We recommend checking it weekly since updates are being added at a fairly fast pace.

Your AutoProPAD includes a free year of unlimited updates.When your subscription ends, you can continue to use your unit like normal, but any new updates will not be available to download. Also, on-the-vehicle technical support is only available to users with an active subscription. Please note that when your subscription ends, you have 30 days to renew your subscription. If you fall outside of a subscription for more than 30 days, if you decide to renew again, you will be charged a $150 reactivation fee. At $600/year, or $50/month, it's silly to not just keep your subscription active.

XTool is providing support for this machine from within the US at (888) 988-6865. Please save that number. Note that technical support is only available for users with an active subscription.

The manufacturer provides a 1-year limited warranty against defects (not physical damage), covering parts and labor (usually not shipping). Please contact Erik in XTool's US office with any problems.

Based on 0 reviews

0.0 overall


There are no reviews yet.