| manufacturer | Nissan Motor |
| make | Nissan |
| fcc id | CWTWB1U733 |
| ic id | 28268EA 28268ZT |
| oem part number | 28268-ZT03A |
| frequency | 315MHZ |
| number of buttons | 3 |
| reusable | Yes |
| battery size | CR2032 |
| compatibility | 2008-2014 Nissan Armada 2005-2019 Nissan Frontier 2007-2008 Nissan Murano 2011-2018 Nissan NV 2005-2011 Nissan Pathfinder 2007-2012 Nissan Sentra 2007-2016 Nissan Titan 2007-2012 Nissan Versa 2005-2011 Nissan X-Terra |
| more info | INTERCHANGE PART NUMBERS CWTWB1U821 CWTWB1U415 |
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove key from the ignition. Unlock the doors using the driver's side power lock/unlock switch then open the drivers door.
| Condition | Used, New, Aftermarket, Refurbished |
|---|
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.
There are no reviews yet.