FEEDBACK
, , , , , , , , , , , , , , ,

REPLACEMENT 3B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM KOBUT1BT / KOBLEAR1XT

SKU: 30101

In stock

 (17 available)

$1.99

In stock

Frequently Bought Together:

CR2032

B111 CIRCLE PLUS Z KEYWAY TRANSPONDER KEY FOR GM WITH OEM CHIP

manufacturer Sffobs Inc.
make Chevrolet, GMC
fcc id KOBUT1BT, KOBLEAR1XT
oem part number 15732803
number of buttons 3
compatibility 1998-2002 Chevrolet S-10
1998-2002 GMC Sonoma
1999-2004 Chevrolet Tahoe
1999-2004 Chevrolet Suburban
1999-2011 Chevrolet Silverado
1999-2001 GMC Yukon
1999-2001 GMC Yukon XL
1999-2001 GMC Sierra

REPLACEMENT 3B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM KOBUT1BT / KOBLEAR1XT

You must have all remotes including working ones when performing this procedure. 1. Close all doors. 2. Insert key into the ignition. 3. Press and hold the power UNLOCK button on driver's side door panel. Do not release until instructed to do so in step 5. 4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key) 5. Release the power unlock button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically. If locks cycle then continue to step 6.(if the door locks begin to lock and unlock BEFORE releasing the unlock button then the vehicle has not entered programming mode and you must start over. Remove key, open door and return to step 1. If the vehicle continues to lock and unlock before releasing the unlock button then there is a problem with the vehicles system and remotes must be programmed by a certified professional. If you are unable to get the door locks to cycle then you are turning the key too quick, too slow, there's a problem with the vehicles system, or the vehicle is not equipped with a factory keyless entry system. 6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds. 7. NOW repeat step 6. for all additional remotes including working ones. 8. After step 6. has been performed for all remotes TURN ignition to ON to exit programming mode. 9. Turn ignition to OFF, remove key and test all remotes.

Weight .125 lbs
Dimensions 3 × 1.5 × 0.5 in
Condition

Like New, OEM Refurbished, OEM Reshell

All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “REPLACEMENT 3B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM KOBUT1BT / KOBLEAR1XT”

There are no reviews yet.