| manufacturer | Sffobs Inc. |
| make | Mazda |
| frequency | No Electronics Included |
| compatibility | 2007-2011 Mazda CX7 2007-2011 Mazda CX9 2011 Mazda 2 2007-2013 Mazda 3 2006-2011 Mazda 5 2009-2019 Mazda 6 2005-2015 Mazda Miata MX5 2005-2011 Mazda RX8 2010-2013 Mazda Speed 3 |
| chip id | No Chip Included |
| keyway ilco | MZ24 |
REPLACEMENT FLIP BLADE HEAD FOR MAZDA NO TRANSPONDER
1. OPEN DRIVERS DOOR AND KEEP OPEN 2. Lock and Unlock the drivers door using the power lock switch on door panel. 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. 5. Open and close drivers door 3 times ending with door in the open position. 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should then lock and unlock. 8. If programming a second remote press any button onit 2 times and door locks should lock and unlock. 9. Remove key from ignition and locks should lock and unlock again. 10. Test Remotes
| Weight | .125 lbs |
|---|---|
| Dimensions | 3 × 1.5 × 0.5 in |
| Condition | Like New, OEM Refurbished, OEM Reshell |
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.
Based on 0 reviews
Be the first to review “REPLACEMENT FLIP BLADE HEAD FOR MAZDA NO TRANSPONDER”
You must be logged in to post a review.
There are no reviews yet.