manufacturer | Sffobs Inc. |
make | Buick, Chevrolet, Cadillac, GMC, Pontiac, Saturn |
fcc id | OUC60221 OUC60270 |
frequency | No Electronics Included |
number of buttons | 4 |
reusable | Yes |
battery size | CR2032 |
compatibility | 2006-2012 Buick Lucerne 2009-2012 Buick Enclave 2006-2011 Cadillac DTS 2004-2009 Cadillac SRX 2010 Chevrolet Equinox 2006-2012 Chevrolet Impala 2006-2007 Chevrolet Monte Carlo 2007-2012 Chevrolet Express 1500 2500 3500 2009-2012 Chevrolet Traverse 2007-2012 GMC Acadia 2007-2012 GMC Savana 1500 2500 3500 2007-2009 Saturn Outlook |
more info | FULLY INTERCHANGEABLE PART #'S 22952177, 20935330, 20833561, 15912859, 10337866, 15859239, 20935330, 22952177 |
REPLACEMENT 4B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM OUC60221 / 0UC60270
SKU: 30097In stock
(32 available)$1.99
In stock
Frequently Bought Together:
REPLACEMENT 4B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM OUC60221 / 0UC60270
No Manual Programming Procedure Available for 2011 + Year Models Automotive Locksmith or Dealer Programming Only.
For Earlier Year Models Please See Instructions Below:
Use this Procedure for Vehicles with
Driver Information Center Buttons
This information is in your Owners Manual in the
Drivers Information Center Section.
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.
5. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.
6. TO EXIT PROGRAM MODE TURN KEY OFF AND REMOVE KEY. TEST REMOTES
Use this Procedure for Vehicles without
Drivers Information Center Buttons
To access this display, the vehicle must be in Park (P) with key in the on position (as far
as you can go without cranking engine)
1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.
2. Press and hold the trip odometer reset stem for three seconds.
The message REMOTE KEY LEARNING ACTIVE will display
3. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.
4. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode turn key off and remove key.
Test remote(s).
Weight | .125 lbs |
---|---|
Dimensions | 3 × 1.5 × 0.5 in |
Condition | Like New, OEM Refurbished, OEM Reshell, Aftermarket |
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.
Based on 0 reviews
Be the first to review “REPLACEMENT 4B KEYLESS ENTRY REMOTE SHELL / CASE FOR GM OUC60221 / 0UC60270”
You must be logged in to post a review.
There are no reviews yet.