|make||Buick, Cadillac, Chevrolet, GMC, Saturn|
|number of buttons||4|
|compatibility||2008-2017 Buick Enclave
2007-2010 Cadillac Escalade
2007-2008 Cadillac SRX
2007-2013 Chevrolet Avalanche
2007-2014 Chevrolet Suburban
2007-2014 Chevrolet Tahoe
2009-2017 Chevrolet Traverse
2007-2017 GMC Acadia
2007-2011 GMC Sierra
2007-2014 GMC Yukon
2007-2010 Saturn Outlook
2009-2010 Saturn Vue
|more info||FULLY INTERCHANGEABLE PART #'S
15913416, 15918891, 20952476, 25784075,
15194382, 15857835, 15916015, 20869054,
2007-2017 GM GMC CHEVROLET BUICK KEYLESS ENTRY REMOTE FOB 4B POWER HATCH OUC60221 / 0UC60270SKU: 10248
$19.95 – $34.95
No Manual Programming Procedure Available for 2011 + Year Models Automotive Locksmith or Dealer Programming Only.
For Earlier Year Models Please See Instructions Below:
Use this Procedure for Vehicles with Driver Information Center Buttons
This information is in your Owners Manual in the Drivers Information Center Section.
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximatley 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
6. TO EXIT PROGRAM MODE TURN KEY OFF AND REMOVE KEY. TEST REMOTES
Use this Procedure for Vehicles without Drivers Information Center Buttons
To access this display, the vehicle must be in Park (P) with key in the on position (as far as you can go without cranking engine)
1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.
2. Press and hold the trip odometer reset stem for three seconds. The message REMOTE KEY LEARNING ACTIVE will display
3. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
4. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode turn key off and remove key.
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.